Vis undermenu

A GSY BEAMTM is always customised to the specific project

GSY BEAMTM are used for many purposes in element constructions. A beam will always be customised to the specific project and can be incorporated as part of constructions with challenges in relation to statics and geometries. This is why we offer to collaborate from a very early stage of the planning phase. This allows us to produce the best solutions as part of a strong professional partnership.

GSY BEAMTM can be respecified as required

If you need to use other types of beam to harmonise deck geometry and load bearing lines, GSY BEAMTM can always satisfy the specific requirement. GSY BEAMTM means architectural freedom.

GSY BEAMTM can be used in all contexts

GSY BEAMTM is always adapted to the specific project and is also incorporated as part of a load bearing stabilising steel structure.

GSY BEAMTM as part of a flexible design

GSY BEAMTM can be used for almost all applications because of its increased flexibility. The design is flexible and is always adjusted to the customer’s requirements with regard to function and geometry. GSY BEAMTM is produced to the required specifications with casting skirts, reinforcements, joints, temporary barrier mountings and sockets for the desired purpose.

GSY BEAMTM is the artery of an element-based construction project

GSY BEAMTM connects all the elements in element-based projects and also serves as the abutment for in-situ cast blocks.

GSY BEAMTM solves geometrical challenges

GSY BEAMTM is always customised to the specific project, thus dealing with the challenges represented in modern construction projects, where load bearing lines do not always follow straight fixed modules at right angles.

Concrete reinforcement channels in GSY BEAMTM

GSY BEAMTM is supplied with structural channels for concrete reinforcement all the way through.

Cable reinforcement channels in GSY BEAMTM

GSY BEAMTM is supplied with body channels for cable reinforcement all the way through.

Corrugated tube reinforcement tubing in pillars through GSY BEAMTM

GSY BEAMTM is supplied with welded in RHS-profiles for the installation of through reinforcement by corrugated tubes in pillars where beams rest fully on top of the pillar.

Corrugated tube reinforcement tubing in pillars through GSY BEAMTM

GSY BEAMTM is supplied with welded in RHS-profiles for the installation of through reinforcement by corrugated tubes in pillars where beams rest fully on top of the pillar.

Corrugated tube reinforcement through GSY BEAMTM

Where multiple beams rest on the pillar and space is required for through reinforcement using corrugated tubes space is prepared for this between the ends of the beams.

Corrugated tube reinforcement in walls through GSY BEAMTM

GSY BEAMTM is supplied with welded in RHS-profiles for the installation of through reinforcement in walls where beams rest completely in and along the wall.

Gerber joint and cross-section optimisation for GSY BEAMTM

GSY BEAMTM can be performed with a Gerber joint if pillar statics require the use of through beams, or if the cross section needs to be optimised out of consideration of load bearing capacity or deformations.

Gerber joint for GSY BEAMTM

GSY BEAMTM can be performed with an end panel with a welded-on extension block and installation bolt.

GSY-E BEAM with casting skirt

GSY BEAM is available for delivery with casting skirts for cast in-situ deck edging.

GSY BEAMTM with abutment panel for installation where there are gaps in the underlying deck

GSY BEAMTM is available for delivery with welded-on abutment panel for deck where the underlying deck has gaps in elevation.

GSY BEAMTM with socket for greater load bearing capacity and rigidity

GSY BEAMTM can be supplied with a bigger socket if necessitated by load bearing or rigidity requirements.

GSY BEAMTM labelling

GSY BEAMTM is supplied with a unique ID number.

Hoisting GSY BEAMTM

GSY BEAMTM is supplied with hoisting sockets in the upper flange

Temporary barrier mounting bracket on GSY-E BEAM

GSY-E BEAM can be performed with a welded-on RHS 50x50x3mm barrier mounting bracket for the installation of a temporary barrier when used as a beam adjacent to exposed edges.

Temporary support for GSY BEAMTM

GSY BEAMTM does not support imbalanced stress on the beam itself.  If this is required or if there is large variance in deck reach which causes the beam beneath the assembly to be subjected to loading from one side while still unsecured against torsion in some other manner, the beam will need to be temporarily stiffened using support elements secured to the base of the loaded side until the outer casting has been performed.

Temporary support for GSY-E BEAM

GSY-E BEAM, used adjacent to exposed edges and thus exposed to loading from one side without being otherwise secured against torsion, the beam will need to be temporarily stiffened using support elements secured to the base of the loaded side until the outer casting has been performed.